AS11(MX+BLE)

 

AS11 supports 4G LTE Cat.1/Cat.M1 and is equipped with rechargeable battery making it an ideal solution for asset management. With IP68 rated casing, AS11 is designed to operate under extreme environment against water and dust. It is also equipped with GPIOs for varieties of application expandability and flexibility by connecting to a wide range of accessories.

Categories: , Tags: , , Brand:

Description

Brand

ATrack

Additional information

Weight 0.25 kg
Dimensions 4.72 × 3.15 × 1.42 cm
QTY

1-99, @100, @200

Technical details

CELLULAR ELECTRICAL
AS11-MX (AT&T) LTE FDD Cat.M1 Operating Voltage Vehicle 12V / 24V system
B2 (1900), B4 (AWS1700), B12 (700) Current Consumption Operating: 30-120mA @12V
AS11-LS (Sprint) LTE FDD Cat.1 Deep Sleep: < 1.2mA @12V
B2 / B25 (1900), B4 (AWS1700) Backup Battery 3.7V 6400mAh
B5 / B26 (850), B12 (700)
Data Support UDP / IP, TCP / IP, SMS over IMS MEMORY
Antenna Embedded cellular antenna Internal Flash Memory 64 Megabit
Up to 120,000 logs
GPS Up to 21,000 queues
Receiver Type 99 channel engine
Location Technology GPS & GLONASS ENVIRONMENTAL
SBAS Support WAAS, EGNOS, GAGAN, MSAS Operating Temp −20 to +60 °C (with battery)
Tracking Sensitivity -167dBm −40 to +70 °C (without battery)
Acquisition Sensitivity -149dBm Humidity 95%RH @ 50° C non-condensing
Location Accuracy 2.5m CEP 50% Vibration/Shock MIL-STD-810G, SAE J1455
Antenna Internal (Optional external antenna) IP Rating IP68
INPUTS/OUTPUTS PHYSICAL
Vehicle Bus (Optional) External Adapter Dimension 120 mm x 80 mm x 36 mm
Serial Interface RS232 (4.72″ x 3.15″ x 1.42″)
Digital Ignition Input 1 Positive Input (Configurable) Weight 250g (0.56 lb)
Digital Inputs Up to 2 (Configurable) Enclosure Flame Retardant ABS+PC
Digital Outputs Up to 2 (Configurable) Mounting Method Screw Mount, Magnet Mount
Max. sink current 500mA
Analog Inputs Up to 1 (Configurable) CONNECTORS
DC 0~40V (12bits resolution) I/O Connection Circular 8 Pin Connector
1-Wire Interface 1 (Driver ID, Temperature sensors) SIM Card Socket Internal NanoSIM (4FF)
LED Indicators 2 LEDs (GPS, Cellular) PC/Accessory Interface RS232 with 5V (±5%) Power
Bluetooth (Optional) Bluetooth Low Energy (5V is available in non-battery mode only)
External GPS (Optional) SMA
SENSORS Configuration Interface RS232 Interface
Accelerometer 3-axis ±16g
DEVICE MANAGEMENT
Configuration ADM, SMS, RS232 Cable
Firmware Update ADM, FOTA, RS232 Cable
CERTIFICATIONS
Standards FCC, IC, PTCRB, RoHS
Carriers AT&T, Sprint, TELUS

Video

Reviews

There are no reviews yet.

Be the first to review “AS11(MX+BLE)”

Your email address will not be published. Required fields are marked *

[]